All components are powdered coated

Frames
Vertical end frames are 2 metres high by 500mm deep, are made from 60 mm x 30 mm rectangular steel section welded together. The end frames have slots to connect horizontal beams which support tool cabinets, shelves, drawer units ,work benches and tool displays. 

Beams
Support beams have connectors each end that lock on to the end frames and are recessed to hold shelves, cabinets, drawer units and work bench tops. Beams come in two sizes, 925mm and 1850mm, inside measurement. Each pair of beams are engineered to support an evenly distributed load of up to 150kg for 925mm and 300kg for the 1850mm.
 
Shelves
When vertical frames and the horizontal beams are in place, the steel shelves are designed to fit into the recess in the beams. The shelves are 925mm wide to increase the versatility of the storage.
 
Work Bench
The work bench is 1850mm wide, 600mm deep and 25mm thick with a timber top. The work bench top is supported at any height by two 1850mm horizontal beams. A 2.0mm rubber mat to cover the work bench, may be purchased separately. 

Two door cabinet unit
The two door cabinet unit is 900mm high and is made from 1mm steel. It has two adjustable shelves, keyed lock and will also fit on to two beams at any height in the unit.

Four drawer unit
Drawer units are made from 1mm steel and are 300mm high. The four lockable drawers are all different sizes to allow for maximum storage versatility. The draw unit can be placed on two horizontal beams at any height in the unit. A rubber mat is supplied for the top.

Tool Display Board
The tool display board is made from 250mm high slats of pre-drilled steel sheet 1.5 mm thick that connects to the end frames and accepts steel hooks. Hooks are sold separately.